Question No. 1

Which two statements describe the Cisco UCS Manager full state type of backup? (Choose two.)

• A. The file created can be used for an import.
• B. The file created cannot be used to restore the system during disaster recovery.
• C. The file created can only be used to restore a system that is running the same version as the system from which the backup file was exported.
• D. It creates an XML file.
• E. It creates binary file.

Question No. 2

You attempt to perform an ESXi update on a Cisco UCS C250 server, but the update does not recognize the NICs. Youmust perform the update as quickly as possible. Which step must you do first?

• A. Check the UCS compatibility matrix and replace the NIC with a supported one.
• B. Reconfigure the NIC ID on the LOM.
• C. Update the LOM firmware by using the Cisco Host Update Utility.
• D. Update the NIC firmware by using the Cisco Host Update Utility.

Question No. 3

Which two statements are true concerning the role-based access control specifics of a Cisco Unified Computing System? (Choose two.)

• A. By default, user accounts expire after 90 days; a warning message will he generated 10 days prior to expiration.
• B. A locally authenticated user account is any user account that is authenticated through LDAP, RADIUS. or TACACS+.
• C. A user that is assigned one or more roles will be allowed the privileges that are consistent across all of the assigned roles.
• D. All roles include read access to all configuration settings in the Cisco Unfiled Computing System domain.
• E. If a user maintains a local user account and a remote user account simultaneously, the roles that are defined in the local user account override those that are maintained in the remote user account.

Question No. 4

Cisco UCS Manager has deleted the VM object from its database, yet it still exists in vCenter. For which two reasons is the object removed from the Cisco UCS Manager database? (Choose two.)

• A. The VM last passed traffic more than 5 minutes ago.
• B. The VM is misconfigured.
• C. The VM has been offline for more than 15 minutes.
• D. vCenter is offline.
• E. The VN link policy has been set for auto-deletion during a vMotion event.
• F. The link between the fabric interconnect and IOM is offline.
• G. The object was deleted in the Cisco UCS Manager, which also deletes it from vCenter.
• H. The VM traffic is being sent to a SPAN

Question No. 5

Refer to the exhibit.

Which description of the interface is true?

• A. FC interface carrying VSAN 500
• B. unified interface carrying VLAN 500
• C. trunking FCoE port carrying VSAN 500
• D. unified interface bound to the Ethernet 1/25 interface

Question No. 6

Refer to the exhibit.

Which two media types can you mount from the KVM console? (Choose two.)

• A. ISO
• B. VHD
• C. VHDx
• D. IMG
• E. VMDK

Question No. 7

Which three statements are a result of utilizing org permissions on VLANs within a sub-org? (Choose three.)

• A. VLAN IDs can be defined only once globally.
• B. VLAN IDs can be defined within each sub-org.
• C. VLAN name must match across orgs and sub-orgs.
• D. VLAN name can be different per sub-org.
• E. Sub-org vNICs can utilize parent org VLANs.
• F. Parent org vNICs can utilize sub-org VLANs.
• G. Sub-org vNICs can utilize only parent org native VLANs.

Question No. 8

Which of the following is true with respect to recovery from failure with automatic pinning that is configured on a cluster of Cisco Unified Computing System 62XX Fabric Interconnects?

• A. By default, server MAC addresses are pinned to uplink interfaces using PIN groups.
• B. When a northbound fabric interconnect link goes down, the affected servers will use NIC teaming to re-establish connectivity on the second fabric interconnect.
• C. When a northbound fabric interconnect link goes down, the fabric interconnect will send a gratuitous ARP to the northbound switch to announce the servers on the new port.
• D. In the event that all uplink ports on the fabric interconnect lose connectivity, the 22XX I/O module shuts down all of the host ports until at least one uplink is restored.

Question No. 9

You have been tasked with performing a backup through Cisco UCS Manager that can be used to restore the system during disaster recovery. Which type of backup must you perform?

• A. System configuration
• B. Full state
• C. All configuration
• D. Logical configuration

Question No. 1

You need to identify which DCB standard provides these functionalities: negotiation capabilities for features, the distribution of parameters from one node to another, and logical link up and down signaling for both Ethernet and Fibre Channel interfaces.

Which DCB standard should you identify?

• A. ETS
• B. PFC
• C. DCBX
• D. QCN

Question No. 2

In the Create Dynamic vNIC Connection Policy dialog box, there is a configurable field titled Protection. What is the significance of the three choices for Protection?

• A. allows reserve vNICs to be allocated out of the spares pool
• B. enables hardware-based failover
• C. enables static binding of the VM port profile to dynamic vNICs
• D. selects the primary fabric association for dynamic vNICs
• F. allows dynamic vNICs to be reserved for fabric failover

Question No. 3

In which management platform do you use Windows PowerShell to configure, deploy, and manage systems?

• A. Cisco UCS Desired State Configuration Resource
• B. Cisco ICS Central
• C. HCL tool in Cisco UCS
• D. Cisco IMC

Question No. 4

Which two items can you provision in a vHBA Template? (Choose two.)

• A. Max Data Field Size
• B. SCSI I/O Queues
• C. FCoE VLAN
• D. vHBA Interrupt Mode
• E. Stats Threshold Policy
• F. FLOGI Timeout

Question No. 5

You have chosen to defer updates to service profiles and to schedule updates. Which option do you modify in the maintenance-policy to accomplish this goal?

• A. Reboot Policy
• B. Schedule
• C. Description
• D. Other

Question No. 6

Refer to the Exhibit.

Refer to the Exhibit. Which two components are needed to create an IQN suffix pool?

• A. description
• B. iSCSI vNlC
• C. prefix
• D. IQN block
• E. initiator IP address

Question No. 7

Which format do you use when creating a third-party certificate in Cisco UCS Manager?

• A. CER
• B. PEM
• C. CRT
• D. DER

Question No. 8

A Cisco UCS administrator configuring QoS, Which two options are valid QoS system classes in a Cisco UCS blade system? (Choose two )

• A. drop eligible
• B. transactaional data
• C. best effort
• D. scavenger
• E. Fibre Channel

Question No. 9

You need to configure service profiles for a Cisco UCS system.

What is an advantage of using the Expert wizard to create the service profiles instead of using the Simple wizard?

• A. Only the Expert wizard supports Fabric Interconnect expansion module ports to beused in 10-Gigabit uplink mode or Fibre Channel mode.
• B. Both wizards support the same features, but the Expert wizard provides no configuration options for the features.
• C. The Expert wizard supports stateless computing and mobile service profiles.
• D. The Expert wizard supports all blade generations, whereas the Simple wizard supports only M1 blades, M2 blades, and Cisco VIC cards.