Here is the solution at ComptiaBraindumps, we at ComptiaBraindumps provide you latest and valid Dell EMC PowerEdge DES-4121 braindumps version 2018. The only one thing you need to do is download valid Dell EMC DES-4121 Braindumps now. After that you can purchase our premimum version of DES-4121 dumps. Our DES-4121 braindumps are updated and error free, because all the DES-4121 exam material checked and verified by the experts.
|Full Exam Name||Implementation Engineer PowerEdge|
♥ 2018 Valid DES-4121 Braindumps ♥
DES-4121 exam questions, DES-4121 PDF dumps; DES-4121 exam dumps: DES-4121 Dumps (60 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)
Latest and Most Accurate Dell EMC DES-4121 Braindumps:
A technician needs to install the OS on a server remotely using iDRAC. What is the minimum iDRAC
license required to perform this task?
D. Baseboard Management Controller
A technician needs to replace a server component with orange tabs/releases. Which set of paired
steps should the technician take to complete this task?
A. Power off the server
Apply anti- static procedures
B. Remove power cables
Cold swap the component
C. Cold swap the component
Apply anti-static procedures
D. Hot swap the component
Apply anti -static procedures
A technician creates two virtual disks and assigns a dedicated hot spare to each virtual disk. They
also create a global hot spare. A drive fails on the second virtual disk what is the result?
A. Dedicated hot spare for the virtual disk replaces the failed drive.
B. Global hot spare replaces the failed drive
C. Copyback operation occurs between the (ailed drive and the dedicated hot spare
D. Copyfack operation occurs between the tailed drive and the global hot spore
What can a technician do to ensure that no malicious code can be introduced into any of the servers
through physical access?
A. Set USB 3 0 to disabled
B. Set Secure Boot Policy to enabled
C. Set User Accessible Ports to disabled
D. Set UEFl Variable Access to disabled
A technician is installing a new server and is not getting any link lights on the iDRAC management
port. They have verified that the cable and switch port are working.
What could be causing this issue?
A. iDRAC has an Express license
B. IP has not boon set the Lifecycle Controller
C. iDRAC has been disabled in the lifecycle Controller
D. iDRAC firmware update is currently in progress
New Updated DES-4121 Exam Questions DES-4121 PDF dumps DES-4121 practice exam dumps: https://www.dumpsschool.com/DES-4121-exam-dumps.html